The ability to share the issue resolution status, progress updates, troubleshooting notes, and discovered problems and deficiencies are essential to effective collaboration among the project team members and to discovering and addressing systemic problems. IMMS InfraLink provides a universal way of capturing issue progress updates any time meaningful and applicable information is gathered or the issue resolution status changes.
The purpose of this document is to This article discusses the following topics, which will help you become familiar with the kinds of issue updates supported by IMMS InfraLink and the information that may or has to be included when performing them.
...
Issue resolution follows a defined process, which goes through a sequence of milestones referred to as statuses. This sequence is reflected in the workflow configured for the contract by the IMMS InfraLink administrator. IMMS InfraLink allows the project team to keep a complete and accurate history of the steps taken to resolve the issue by entering issue updates.
Since some of the project team actions may change the status of the issue in accordance with the configured workflow, while other activities do not result in the immediate status change, IMMS InfraLink supports two kinds of updates:
- Basic Updates, i.e. the updates that do not change the resolution status of the issue, are initiated using the aptly named "Update" button placed on the right hand side of the issue details panel;
- Status Changes, or the workflow actions, are initiated using the available workflow buttons named after corresponding workflow activities (e.g. "Acknowledge", "Suspend", "Complete", etc) placed on the left hand side of the issue details panel.
Entering an Update
IMMS InfraLink provides a universal, consolidated interface to enter issue updates, and you can enter or modify a variety of issue attributes using the update form, as shown below:
...
In some cases it may be necessary to back-date the issue being entered. If you have sufficient privileges, IMMS InfraLink will allow you to back-date the issue by editing the Time Reported field, which is set to the current date/time by default. The reported time will be used as the creation date for this case when calculating handling metrics.
For example, if you were in the field where you cannot access IMMSInfraLink, and you started addressing the issue before you had a chance to get online. Note the time the issue occurred. When you get a chance to enter the issue in IMMSInfraLink, you would need to indicate the date/time when the issue was actually reported to you (and to also back-date the updates).
Note: in order to protect integrity of the data and ensure accurate reporting, the IMMS InfraLink instance administrator may restrict who is allowed to back-date issues. If you are not granted the corresponding permissions, you will see the Time Reported field on the New Case form as read-only. If you need to back-date the issue, you will need to contact your project leader, so they can edit the case and modify the reporting date/time.
...
In case your account has the privileges to assign work, IMMS InfraLink will allow you to save time by assigning the issue you're creating directly from the New Case form using the Assigned To control. The control is self-explanatory and will allow you to select one or multiple users to assign the issue to. Note that the user selection will be constrained to only those users who have the necessary role(s) to be responsible for work under the contract you selected on the New Case form. In other words, IMMS InfraLink will not allow you to select a user who cannot access or work on the issue.
...
Providing Additional Information
The IMMS InfraLink instance you're using may be configured to capture additional information for each new issue. The information to be captured is defined by the IMMS InfraLink administrator for each contract and case category (i.e. different categories of cases may require different fields to be populated). Some of the additional data elements may be defined as required, while the other ones may be defined as optional.
Required fields, if any, are denoted with an asterisk (*). If configured by the IMMS InfraLink instance administrator, a tool tip will be provided to describe the purpose of each field.
...
Note: These additional information fields have specific behaviors defined by the IMMS InfraLink instance administrator. Based on these defined behaviors, the fields may be required, optional, read-only, or even hidden on the subsequent issue details and update screens.
...
In some cases, you may want other users to receive email notifications pertaining to the resolution progress on the issue you are creating. For example, when entering an issue on behalf of the end-user/customer, you may want the end-user/customer to be notified. Likewise, when dealing with a complex technical issue, you may want to keep the engineering team members informed of the issue and the progress on it.
IMMS InfraLink will allow you to select one or multiple users to be notified of the issue and its updates via the Notify via Email control. The control is self-explanatory and will allow you select one or multiple parties and add them to the notification list. The following restrictions apply:
To prevent disclosure of sensitive information to unauthorized parties, IMMS InfraLink will generate notifications only to users with active IMMS InfraLink accounts. You cannot add external email addresses not associated with an IMMS InfraLink accounts to the notification list.
Furthermore, IMMS InfraLink will send notifications only to those users who have sufficient privileges to see cases under the contract you selected on the New Case form. The list of users presented on the Notify via E-Mail user lookup will be restricted accordingly, and IMMS InfraLink will not allow you to select a user who doesn't have sufficient privileges to see the information.